Conspec Controls CN Series Instrukcja obsługi i konserwacji - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Nadajnik Conspec Controls CN Series. Conspec Controls CN Series 18 stron. Universal transmitter
Drukuj stronę6 Guttman Boulevard, Charleroi Industrial Park, Charleroi Pennsylvania 15022
3.0 INSTALLATION INSTRUCTIONS
The Universal Transmitter is available in a NEMA 4X rated enclosure and a NEMA 7X rated
Explosion Proof enclosure for use in Classified Areas.
Locate a suitable location free of drips and drafts that allows the user to safely access the unit. The
Universal Transmitter shall be mounted so the detection head is pointing downward. Securely
mount the unit using industry approved methods and materials taking into account sound
mechanical and electrical practices.
It is the user's responsibility to follow all applicable Federal, State, Local Building and
Electrical Codes including NEC Guide Lines.
The Universal Transmitter Card is powered via a 3-conductor 18-22AWG shielded cable.
Power to the Universal Transmitter should be isolated from process power. The use of an isolated
power supply (Clean Power) is strongly recommended when the Universal Transmitter is part of a
personnel safety system. In most cases, building and electrical codes require the use of Conduit to
protect electrical wiring and prevent tampering. Conspec recommends electrical wiring to the
Universal Transmitter is placed in conduit.
The wiring diagram on the next page details the connection of V+, GND, and SIG on the terminal
labeled J2.
(800) 487-8450; Fax: (724) 489-9772
Page 4 of 17
http://www.conspec-controls.com