Contacta HLD4 설치 및 사용 설명서 - 페이지 14
{카테고리_이름} Contacta HLD4에 대한 설치 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Contacta HLD4 20 페이지. Hearing loop driver
페이지 인쇄When connecting power to the hearing loop driver for the first time,
the power button will illuminate blue and the hearing loop driver will
be "On".
Pressing the power button will change the colour to red and the
hearing loop driver will be in the standby mode which uses low power
and no signal will be passed to the loop. In order to remove all power
from the unit the power supply must be disconnected from the hearing
loop driver and the mains outlet.
Press the button power again and it will light up blue. The system is
now ready for use.
•
Set the television or other audio equipment to the normal listening
level for other members of your household.
•
Select the sound source required. See page 9 for more details.
•
Set the volume control to minimum.
•
Set the tone control to the normal position ( 12 o'clock).
•
Switch your hearing aid to the 'T' or loop function.
•
Adjust the volume and tone to suit your listening.
Pressing the power button will turn the hearing loop driver off and
the light will go red. The next time the power is turned on the volume,
tone and source selections from the previous session will be restored.
Volume control
Use to adjust the volume of the signal received by the hearing aid.
As the signal increases the blue light will travel around the control
indicating the volume level in use.
14