Contacta HLD4 Installation & User Manual - Page 14
Browse online or download pdf Installation & User Manual for Hearing Aid Contacta HLD4. Contacta HLD4 20 pages. Hearing loop driver
Print PageWhen connecting power to the hearing loop driver for the first time,
the power button will illuminate blue and the hearing loop driver will
be "On".
Pressing the power button will change the colour to red and the
hearing loop driver will be in the standby mode which uses low power
and no signal will be passed to the loop. In order to remove all power
from the unit the power supply must be disconnected from the hearing
loop driver and the mains outlet.
Press the button power again and it will light up blue. The system is
now ready for use.
•
Set the television or other audio equipment to the normal listening
level for other members of your household.
•
Select the sound source required. See page 9 for more details.
•
Set the volume control to minimum.
•
Set the tone control to the normal position ( 12 o'clock).
•
Switch your hearing aid to the 'T' or loop function.
•
Adjust the volume and tone to suit your listening.
Pressing the power button will turn the hearing loop driver off and
the light will go red. The next time the power is turned on the volume,
tone and source selections from the previous session will be restored.
Volume control
Use to adjust the volume of the signal received by the hearing aid.
As the signal increases the blue light will travel around the control
indicating the volume level in use.
14