Contacta HLD4 설치 및 사용 설명서 - 페이지 7

{카테고리_이름} Contacta HLD4에 대한 설치 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Contacta HLD4 20 페이지. Hearing loop driver

Connecting Directly to a Television
If connecting directly to a TV set via optical then you must make sure
that the TV is set to PCM. To do this go into the audio/sound settings
menu on the TV and look for digital audio output/optical out, normally
this would be set to Dolby digital, it needs to be changed to PCM.
Please note that some Televisions auto switch this setting!
NOTE: Using the microphone supplied with your equipment attached
to the speaker grille of the television will return good results and is an
excellent back-up way to connect to the TV.
Setting up your equipment with direct connection to
Sky Q & Sky HD Boxes via Optical
Press Home on your Sky Q remote, select Settings, then select
Setup
Select Audio visual, then select Digital audio output optical and set
it to NORMAL
Press the GREEN button to save the settings
Power OFF the Sky Box, leave for 30 seconds and turn back on,
leave for 5 minutes until the box has had chance to re-calibrate
itself and then test the system
Setting up equipment with direct connection to Virgin
Media Set Top Boxes via Optical
Press Home on your remote
Select Help & Settings

TV Connections

7