Contacta HLD4 Installatie- en gebruikershandleiding - Pagina 7
Blader online of download pdf Installatie- en gebruikershandleiding voor {categorie_naam} Contacta HLD4. Contacta HLD4 20 pagina's. Hearing loop driver
Pagina afdrukkenConnecting Directly to a Television
If connecting directly to a TV set via optical then you must make sure
that the TV is set to PCM. To do this go into the audio/sound settings
menu on the TV and look for digital audio output/optical out, normally
this would be set to Dolby digital, it needs to be changed to PCM.
Please note that some Televisions auto switch this setting!
NOTE: Using the microphone supplied with your equipment attached
to the speaker grille of the television will return good results and is an
excellent back-up way to connect to the TV.
Setting up your equipment with direct connection to
Sky Q & Sky HD Boxes via Optical
•
Press Home on your Sky Q remote, select Settings, then select
Setup
•
Select Audio visual, then select Digital audio output optical and set
it to NORMAL
•
Press the GREEN button to save the settings
•
Power OFF the Sky Box, leave for 30 seconds and turn back on,
leave for 5 minutes until the box has had chance to re-calibrate
itself and then test the system
Setting up equipment with direct connection to Virgin
Media Set Top Boxes via Optical
•
Press Home on your remote
•
Select Help & Settings
TV Connections
7