DAPAudio Concert D3472 제품 설명서 - 페이지 6

{카테고리_이름} DAPAudio Concert D3472에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio Concert D3472 13 페이지. Concert series

Description of the device

Features

The Dap Audio Concert Series is a complete sound reinforcement solution:

• D3470 - 1 active coaxial top unit with 12" woofer and 3" tweeter 1000 Watt / 8 Ohm, equipped with

amplifier and all the electronics required to run the system.

• D3471 - 1 active subwoofer 18" 1200 watt / 6 Ohm, equipped with amplifier and all the electronics

required to run the system.

• D3472 - 1 active subwoofer 18" 1000 watt / 6 Ohm, equipped with amplifier and all the electronics

required to run the system.

• electronic circuitry has been fine tuned to match the speaker systems

• plug and play

Backside CSA-12/3T (D3470)

1) Ground/Lift: Remove ground from circuit to eliminate hum caused by ground loops.

2) Signal Input (XLR Female): Connects the speaker to your mixer to obtain full-range signal

or getting full-range signal from CSA-18-H / CSA-18-LH through a patch cable (not included).

3) Signal Through (XLR Male): Sends parallel full- range signal out to other CSA components.

4) Gain Control (Volume): Controls the levels of incoming signal to the speaker.

5) Power Switch: ON /OFF

6) Fuse: 6,3A

7) Power Cord Connector: Connect to Power with the included power cord.

or getting power from CSA-18-H / CSA-18-LH through a patch power cable (not included).

8) Power Output (Through): Supply power to other CSA components.

9) Fan: Cooling the built-in amplifier inside the subwoofer. Ensure these fans are clear of external

obstructions

Fig. 1