DAPAudio Concert D3472 Product Manual - Page 6

Browse online or download pdf Product Manual for Speakers DAPAudio Concert D3472. DAPAudio Concert D3472 13 pages. Concert series

Print Page

Description of the device

Features

The Dap Audio Concert Series is a complete sound reinforcement solution:

• D3470 - 1 active coaxial top unit with 12" woofer and 3" tweeter 1000 Watt / 8 Ohm, equipped with

amplifier and all the electronics required to run the system.

• D3471 - 1 active subwoofer 18" 1200 watt / 6 Ohm, equipped with amplifier and all the electronics

required to run the system.

• D3472 - 1 active subwoofer 18" 1000 watt / 6 Ohm, equipped with amplifier and all the electronics

required to run the system.

• electronic circuitry has been fine tuned to match the speaker systems

• plug and play

Backside CSA-12/3T (D3470)

1) Ground/Lift: Remove ground from circuit to eliminate hum caused by ground loops.

2) Signal Input (XLR Female): Connects the speaker to your mixer to obtain full-range signal

or getting full-range signal from CSA-18-H / CSA-18-LH through a patch cable (not included).

3) Signal Through (XLR Male): Sends parallel full- range signal out to other CSA components.

4) Gain Control (Volume): Controls the levels of incoming signal to the speaker.

5) Power Switch: ON /OFF

6) Fuse: 6,3A

7) Power Cord Connector: Connect to Power with the included power cord.

or getting power from CSA-18-H / CSA-18-LH through a patch power cable (not included).

8) Power Output (Through): Supply power to other CSA components.

9) Fan: Cooling the built-in amplifier inside the subwoofer. Ensure these fans are clear of external

obstructions

Fig. 1