Audiotechnik Dietz 66010 소유자 매뉴얼 - 페이지 10

{카테고리_이름} Audiotechnik Dietz 66010에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Audiotechnik Dietz 66010 13 페이지. Interface can bus

1) Turn on the key: led is fixed green

2) Keep pressed the reset button until led flashes 1 time red, then release it

3) Led will flashes quickly red and after canbus recognizing will become flashing 1 time orange and 1 time

green. This means that the interface is waiting for new function, in this case:

1 flash orange -> Output 1

1 flash green -> Function 1 -> Positive ignition

4) Press 13 times to select the function needed.

After that the led will flashes 1 time orange and 13 times green.

5) Confirm selection keeping pressed reset button until led switches off, then release it.

Now the interface is waiting for setting output 2. The LED is flashing: 2 time orange, 1 time green, 1

brake.

6) Press 2 times to select the function needed.

After that the led will flashes 2 times orange and 3 times green.

7) Confirm selection keeping pressed reset button until led switches off, then release it.

LED is now constant green

8) Ready to use

If the signal you have selected is wrong, you must repeat the process.

Vertriebs-GmbH ● Germany

Rev 6, Stand: 2 / 2018