Audiotechnik Dietz 66010 Instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronika samochodowa Audiotechnik Dietz 66010. Audiotechnik Dietz 66010 13 stron. Interface can bus
Drukuj stronę
10
1) Turn on the key: led is fixed green
2) Keep pressed the reset button until led flashes 1 time red, then release it
3) Led will flashes quickly red and after canbus recognizing will become flashing 1 time orange and 1 time
green. This means that the interface is waiting for new function, in this case:
1 flash orange -> Output 1
1 flash green -> Function 1 -> Positive ignition
4) Press 13 times to select the function needed.
After that the led will flashes 1 time orange and 13 times green.
5) Confirm selection keeping pressed reset button until led switches off, then release it.
Now the interface is waiting for setting output 2. The LED is flashing: 2 time orange, 1 time green, 1
brake.
6) Press 2 times to select the function needed.
After that the led will flashes 2 times orange and 3 times green.
7) Confirm selection keeping pressed reset button until led switches off, then release it.
LED is now constant green
8) Ready to use
If the signal you have selected is wrong, you must repeat the process.
Vertriebs-GmbH ● Germany
®
Copyright © by Audiotechnik Dietz
Rev 6, Stand: 2 / 2018