Contacta HLD3 설치 및 사용자 설명서 - 페이지 10
{카테고리_이름} Contacta HLD3에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Contacta HLD3 12 페이지. Hearing loop driver (hld)
Contacta HLD3에 대해서도 마찬가지입니다: 설치 매뉴얼 (9 페이지), 운영 및 유지보수 매뉴얼 (3 페이지), 설치 매뉴얼 (9 페이지)
페이지 인쇄
Symptom
No power
detected in the
hearing loop driver
/ power indicator
isn't illuminated.
Input light isn't
illuminated.
Output light isn't
illuminated.
No audio is heard
through the
hearing loop.
10
Troubleshooting
Possible Fault
1) Power cable not plugged in or
faulty.
2) Faulty power supply unit.
3) Plug fuse has blown.
4) Driver has a fault.
1) Sound source isn't powered
on.
2) Input disconnected.
3) Driver has a fault.
1) Volume is too low.
3) Hearing loop pad or
cable incorrectly installed or
disconnected.
3) Driver has a fault.
1) Volume is too low.
2) If using a hearing loop pad,
the hearing device user isn't
seated above the hearing loop
pad.
3) Hearing loop pad or
cable incorrectly installed or
disconnected.
4) Driver has a fault.
Action
1) Check power cable is firmly
plugged in.
2) Change the power supply unit.
3) Change the plug fuse.
it blows again, contact your
dealer.
4) Contact your local dealer.
1) Make sure the television or
sound source is switched on.
2) Ensure either the optical out
or line out is connected to the
HLD3 from the audio source.
3) Contact your local dealer.
1) Turn up the volume on the
driver.
3) See page 4 and ensure all
installation instructions have
been followed carefully.
3) Contact your local dealer.
1) Adjust the volume on the
driver and on the hearing device.
2) Make sure the hearing device
wearer is seated where the
hearing loop pad is located.
3) See page 4 and ensure all
installation instructions have
been followed carefully.
4) Contact your local dealer.
If