Contacta HLD3 Посібник з встановлення та експлуатації - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник з встановлення та експлуатації для Підсилювач Contacta HLD3. Contacta HLD3 12 сторінок. Hearing loop driver (hld)
Також для Contacta HLD3: Посібник з монтажу (9 сторінок), Посібник з експлуатації та технічного обслуговування (3 сторінок), Посібник з монтажу (9 сторінок)
Друкувати сторінку
Symptom
No power
detected in the
hearing loop driver
/ power indicator
isn't illuminated.
Input light isn't
illuminated.
Output light isn't
illuminated.
No audio is heard
through the
hearing loop.
10
Troubleshooting
Possible Fault
1) Power cable not plugged in or
faulty.
2) Faulty power supply unit.
3) Plug fuse has blown.
4) Driver has a fault.
1) Sound source isn't powered
on.
2) Input disconnected.
3) Driver has a fault.
1) Volume is too low.
3) Hearing loop pad or
cable incorrectly installed or
disconnected.
3) Driver has a fault.
1) Volume is too low.
2) If using a hearing loop pad,
the hearing device user isn't
seated above the hearing loop
pad.
3) Hearing loop pad or
cable incorrectly installed or
disconnected.
4) Driver has a fault.
Action
1) Check power cable is firmly
plugged in.
2) Change the power supply unit.
3) Change the plug fuse.
it blows again, contact your
dealer.
4) Contact your local dealer.
1) Make sure the television or
sound source is switched on.
2) Ensure either the optical out
or line out is connected to the
HLD3 from the audio source.
3) Contact your local dealer.
1) Turn up the volume on the
driver.
3) See page 4 and ensure all
installation instructions have
been followed carefully.
3) Contact your local dealer.
1) Adjust the volume on the
driver and on the hearing device.
2) Make sure the hearing device
wearer is seated where the
hearing loop pad is located.
3) See page 4 and ensure all
installation instructions have
been followed carefully.
4) Contact your local dealer.
If