Addonics Technologies MSDU5 사용자 설명서 - 페이지 5

{카테고리_이름} Addonics Technologies MSDU5에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies MSDU5 6 페이지. 1:5 msata / micro sata ssd duplicator

NOTE: This function scans the entire disk before proceeding. Providing a drive that is as

small as possible is strongly recommended.

11-03. Compare Firmware

Used to confirm correct firmware. Connect a drive formatted as FAT

containing one partition with the firmware file in the root directory.

NOTE: This function scans the entire disk before proceeding. Providing a

drive that is as small as possible is strongly recommended.

11-04. Quick Erase HDD

Scans the ports, then quickly erases all sectors on all connected drives.

11-05. Full Erase HDD

Scans the ports, then completely erases all sectors on all connected

drives.

11-06. H/W Diagnostic

Starts comprehensive tests for Ram, LCD, buttons, ports and Flash.

11-07. Load Default

Resets all configuration settings to default.

11-08. Copy HPA

Enables copy functions to duplicate the source drive's Host Protected

Area. Normally this area is defined as not available to a host controller as

defined by ATA/SATA specifications.

11-09. Burn In

Runs a function continuously until aborted. Selections are Copy &

Compare, Compare, Async Cpy & Cmp, Async Compare.

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST)

Phone: 408-453-6212

Email: www.addonics.com/support/query/