Addonics Technologies MSDU5 User Manual - Page 5
Browse online or download pdf User Manual for Disc Duplicator Addonics Technologies MSDU5. Addonics Technologies MSDU5 6 pages. 1:5 msata / micro sata ssd duplicator
Print Page
NOTE: This function scans the entire disk before proceeding. Providing a drive that is as
small as possible is strongly recommended.
11-03. Compare Firmware
Used to confirm correct firmware. Connect a drive formatted as FAT
containing one partition with the firmware file in the root directory.
NOTE: This function scans the entire disk before proceeding. Providing a
drive that is as small as possible is strongly recommended.
11-04. Quick Erase HDD
Scans the ports, then quickly erases all sectors on all connected drives.
11-05. Full Erase HDD
Scans the ports, then completely erases all sectors on all connected
drives.
11-06. H/W Diagnostic
Starts comprehensive tests for Ram, LCD, buttons, ports and Flash.
11-07. Load Default
Resets all configuration settings to default.
11-08. Copy HPA
Enables copy functions to duplicate the source drive's Host Protected
Area. Normally this area is defined as not available to a host controller as
defined by ATA/SATA specifications.
11-09. Burn In
Runs a function continuously until aborted. Selections are Copy &
Compare, Compare, Async Cpy & Cmp, Async Compare.
www.addonics.com
Technical Support (M-F 8:30am - 6:00pm PST)
Phone: 408-453-6212
Email: www.addonics.com/support/query/