DAPAudio MA-630TU 제품 설명서 - 페이지 14

{카테고리_이름} DAPAudio MA-630TU에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio MA-630TU 19 페이지.

Switching between USB and SD playback

Make sure that an USB stick as well as a SD-card are inserted. If you are in USB mode, push the USB/SD

(19) button. Now the display will search for a SD- card

If a SD card is found, the dispay will briefly show SD.

If no SD card is found, the display will show No SD.

Connecting Inputs

Use the jack inputs at the front or the XLR input connectors on the rear to supply audio signals to your DAP

Audio amplifier. The connectors accept balanced and unbalanced audio connections. (The PA- Series

amplifiers are configured standard with "Pin 2 hot" on XLR inputs. For more Information, see the section on

Connection cables on page 14.

Speakers are connected using terminal connectors. See the examples below and following page.

You can use as many speakers as you want as long as the total impedance matches the amplifiers

output.

Example 1: using the 4Ω output with two 8Ω speakers.

Example 2: using the 4Ω output with four 4Ω speakers

Fig. 5

Fig. 6