DAPAudio MA-630TU 제품 설명서 - 페이지 15

{카테고리_이름} DAPAudio MA-630TU에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio MA-630TU 19 페이지.

Example 3: using the 8Ω output with two 4Ω speakers.

Fig. 7

In a low impedance system, the total speakerload should always match the amplifier

impedance. This to avoid overloading the amplifier.

The total speaker power should be at least the power of the amplifier to avoid damage to the

speakers.

High impedance outputs

If using either the 70V outputs or the 100V outputs, note that all speakers should be wired in parallel.

The total power of all speakers summed together should never exceed the total power of the

amplifier in a high impedance (70V or a 100V) system!

Take care of your cables, always holding them by the connectors and avoiding knots and twists when

coiling them: This gives the advantage of increasing their life and reliability.

Periodically check your cables. A great number of problems (faulty contacts, ground hum, discharges,

etc.) are caused entirely by using unsuitable or faulty cables.

Headphones

Unbalanced mono

Balanced mono

Insert