Duratech DLC-010 매뉴얼 - 페이지 9

{카테고리_이름} Duratech DLC-010에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duratech DLC-010 11 페이지.

Troubleshooting

PROBLEM

CHECK

Cover does not close

Status LED is OFF

Status LED is RED

Status LED is blinking RED

Check motor connections

Cover stops at an

incorrect position

Cover moves in the

wrong direction

Check the motor sensor

Calibration failed

feedback

Remote calibration

Check DIP switch 1 position

can not be started

Check CAN LED

Declaraction of Conformity

Declarations of conformity covering this product are available for

download from the House of Duratech website: www.duratech.be

SOLUTION

Check power to DLC-010

Cool down the device, restart and

try again

Contact customer support

Restart calibration or calibration

correction

Swap the 2 motor connections or

swap motor control via LinkTouch

(settings menu --> Cover settings)

DIP switch 1 must be ON

Fix the CAN wiring