Duratech DLC-010 Manual - Página 9

Navegue en línea o descargue pdf Manual para Controlador Duratech DLC-010. Duratech DLC-010 11 páginas.

Troubleshooting

PROBLEM

CHECK

Cover does not close

Status LED is OFF

Status LED is RED

Status LED is blinking RED

Check motor connections

Cover stops at an

incorrect position

Cover moves in the

wrong direction

Check the motor sensor

Calibration failed

feedback

Remote calibration

Check DIP switch 1 position

can not be started

Check CAN LED

Declaraction of Conformity

Declarations of conformity covering this product are available for

download from the House of Duratech website: www.duratech.be

SOLUTION

Check power to DLC-010

Cool down the device, restart and

try again

Contact customer support

Restart calibration or calibration

correction

Swap the 2 motor connections or

swap motor control via LinkTouch

(settings menu --> Cover settings)

DIP switch 1 must be ON

Fix the CAN wiring