Belimo ZIP Economizer 설치 지침

{카테고리_이름} Belimo ZIP Economizer에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Belimo ZIP Economizer 2 페이지. Energy module
Belimo ZIP Economizer에 대해서도 마찬가지입니다: 설치 지침 (4 페이지), 설치 지침 (2 페이지)

페이지 인쇄

MOUNTING INSTRUCTION

ZIP Economizer

Installation

Each ZIP Economizer module is designed with a unique form fit which allows it

to fit only in one location on the ECON-ZIP-BASE.

Insert the ECON-ZIP-COM module in the far right (designated) slot of the ZIP

Economizer base unit. Illustration located below for location.

Press firmly to lock the module in place – you will hear a snap.

Communication Module

™

Removal of ECON-ZIP-COM

Insert a flat head screw driver into the latch of the module. Apply light

pressure on the latch away from the base unit. Lift up to remove.

ECON-ZIP-COM

Technical Data

Type

Name

Description

Comunication

I/O

Comm

interface

Diagnostic

Relay

ALM

alarm

Electrical Specification

RS485 Interface

Optical Isolation max. 1k VDC

(for max. 1min)

Pin 4: RS485 Com Gnd

Pin 7: RS485 Com A

Pin 8: RS485 Com B

Relay contact 24 V

Normal current: 0.5A

Inrush current: 1A