DAPAudio D1256 매뉴얼 - 페이지 12

{카테고리_이름} DAPAudio D1256에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio D1256 16 페이지.

• Press the Find (15, 35) button again to browse through your folders. The display will look as shown in

figure 6.

• You can browse through your folders by using the Rev

• Exit the find mode by pressing the Find (15, 35) button again.

7. Starting Playback

• Press the Play/Pause (9, 32) button during Stop mode or Pause mode to start playback. While running

a track, the display will look as shown in figure 7.

There are two ways to stop playback:

1. Press the Play/Pause

2. Press the Stop

(8, 33) button during playback to return to Stop mode.

• Press the Play/Pause

• Playback resumes when the Play/Pause

• Use the Func (20, 39) button to select a source. You can select:

CD: for recording from a CD directly to either SD/MMC card or USB stick (in MP3 format).

AUX: for recording from a source connected to the Aux In (23) input directly to either SD/MMC card or

USB stick (in MP3 format).

CARD: for copying a SD/MMC card to a USB stick.

USB: for copying a USB stick to a SD/MMC card.

• Pressing the Rec/Del (19, 40) button shortly will start the actual recording. The display will flash and look

as shown in figure 8.

• After 3 seconds the unit will automatically start recording. While recording, the display looks as shown

in figure 9 on the next page.

(9, 32) button during playback to pause at that point.

(9, 32) button to switch between play and pause.

(9, 32) button is pressed again.

(6, 38) and Cue

Fig. 6

(7, 37) buttons.

Fig. 7

Fig. 8