Duratool D03410 매뉴얼 - 페이지 2
{카테고리_이름} Duratool D03410에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duratool D03410 4 페이지. Weighing scale
페이지 인쇄IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future reference.
•
Avoiding exposure to extreme heat or cold, your scale works better when operated
at normal room temperature.
•
Always allow the scale to acclimate to normal room temperature for at least 1 hour
before use.
•
Allow sufficient warm up time. Usually 30 seconds to give the internal components
time to stabilize before calibration or use.
•
Keep your scale in a clean environment. Dust, dirt, moisture, vibration, air currents
and a close proximity to other electronic equipment can all cause an adverse effect
on the reliability and accuracy of your scale.
•
Handle with care. Gently apply all items to be weighed onto the tray top.
•
Avoid shaking, dropping or otherwise shocking the scale. This is a precision
instrument and must be handled with extreme care.
•
Only operate the scale on a stable, flat, vibration free surface.
•
Always remove the batteries if the scales are not to be used for long periods.
WHAT'S INCLUDED
•
Pocket Scales
•
Instruction manual.
OPERATION
•
Place scale on a horizontal flat surface.
•
Press [ON/OFF] key to turn on the scale.
•
Wait until the LCD displays "0.0".
•
Put the object(s) to be weighed on the weighing platform.
•
Press the [M] key to switch between the weighing units.
•
If the display shows "0-Ld" it is overloaded - remove the excess load immediately to
avoid damage.
•
If the display shows "--" and the figures fluctuate, the scales are not properly
supported on a flat surface.
FUNCTIONS
TARE WEIGHING:
•
Turn on scale as described above.
•
Place the "tare item" (eg: container) on the platform.
•
Press [T] button and wait until "0.0" is displayed.
•
Add the "net-weight-item" into the container and the screen will display the weight.
COUNTING FUNCTION
•
Turn on the scale and wait until the LCD displays"0.0".
•
Place a sample amount (25pcs, 50pcs, 60pcs, 75pcs or 100pcs) of the item you
wish to weigh and count onto the platform.
•
Press and HOLD [PCS] key for 2 seconds; the LCD will display a random number,
for example "100" and "PCS" will flash in the corner.
2