Duratuf KL1 조립 지침 매뉴얼 - 페이지 12

{카테고리_이름} Duratuf KL1에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duratuf KL1 16 페이지. Kiwi series

Step 5: Bottom Door Guide: Slide Door to corner. Hang

Door Guide (108) on bottom of the Door. Make it

flush with Corner Flashing. Lift up approximately

3mm so that the Door will Slide freely. Pre-drill

hole and nail in place using a 50mm nail. Slide to

centre. Ensuring Door slides freely, pre-drill hole

and nail Door Guide in place. Check Door is not

binding in the middle then pre-drill holes into

each Rib at similar spacing into Door Step Flash-

ing. Nail off using 50mm nails.

Note:

For sheds with Raised Base Plate option the

Door Step Flashing will protrude down past the

Bottom Plate. Attach Door Guide with rivets.

Step 1: Position Barge Flashing (G102) on gable

ends. Position a Spouting (C103) and rivet

to the Barge Flashing at each end. Repeat

with other Spouting.

KL3 DOOR

KL3 BARGE & SPOUTING

DOOR

Step 2: Centralise Barge Flashing on end and

rivet in place, one rivet into every second

Rib. Fit two rivets through top of Barge

into Rib. Repeat with other Barge Flash-

ing. Check Spoutings are straight, then

rivet to Roof one rivet every second Rib.

CLADDING

BOTTOM

PLATE

DOOR

GUIDE