Duratuf SG2520 조립 지침 매뉴얼 - 페이지 3

{카테고리_이름} Duratuf SG2520에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duratuf SG2520 16 페이지.

CONGRATULATIONS ON PURCHASING A DURATUF SENTRY SHED.

BEFORE YOU BEGIN THE ASSEMBLY PLEASE NOTE SOME IMPORTANT POINTS



Read all instructions carefully



Identify all parts and check quantities against parts list



Select a level site



Do not mark cladding with pencil as lead can cause corrosion to cladding



During assembly, ensure all drill filings are removed between layers of steel, before riveting together



Do not attempt to build your shed in high winds



Beware of sharp edges, recommend use of gloves



Protect your eyes and ears



For ease of assembly, use a friend to help

DRILL

HAMMER

Following are the minimum requirements for cladding used in Sentry Sheds.



Wash all surfaces annually using a hose and soft nylon brush.



Within 2 km of coast – wash every 3 months as above. After a storm, wash the cladding and the gutters as soon

as possible to remove any highly corrosive salt deposits.



Volcanic Ash Fallout – wash as soon as possible, removing fall out from roof and gutters.



Do not allow manures, chemicals or other corrosive materials to have direct contact with cladding

BEFORE YOU START:

SAFETY:

RIVETER

SQUARE DRILL BIT

NAIL PUNCH

3.5 DRILL BIT

TAPE MEASURE

LADDER

PEN