Addonics Technologies External USB2.0 사용자 설명서 - 페이지 4

{카테고리_이름} Addonics Technologies External USB2.0에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies External USB2.0 11 페이지. External usb2.0 enclosure

페이지 인쇄

Installation:

1. Loosen the two screws from the rear plate. (Note: the two screws are special

ones, you do not have to loosen them completely to slide out the tray).

2. Press the front panel and push it left/right forward to open the front panel.

The device has to be even with the metal part of the bracket.

3. Connect the 4pin power and the data cable to the drive.

4. Use the enclosed screws to secure the drive on the tray.

5. After the device is installed, slide the tray into the aluminum box and then

fasten the two screws properly on the box.

Connecting the drive to a Computer:

1. Boot-up your computer into the operating system; make sure the

USB/USB2.0 port from the computer functions well.

2. Connect the power adapter to the drive and the USB cable then turn on the

switch.

3. Connect the other USB connector end to the computer.

4. Your USB2.0 drive is now ready to be use.

5. Follow the software installation.

Addonics Technologies – External USB2.0 Enclosure Users Guide v1.0