Addonics Technologies External USB2.0 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Addonics Technologies External USB2.0. Addonics Technologies External USB2.0 11 pagina's. External usb2.0 enclosure

Pagina afdrukken

Installation:

1. Loosen the two screws from the rear plate. (Note: the two screws are special

ones, you do not have to loosen them completely to slide out the tray).

2. Press the front panel and push it left/right forward to open the front panel.

The device has to be even with the metal part of the bracket.

3. Connect the 4pin power and the data cable to the drive.

4. Use the enclosed screws to secure the drive on the tray.

5. After the device is installed, slide the tray into the aluminum box and then

fasten the two screws properly on the box.

Connecting the drive to a Computer:

1. Boot-up your computer into the operating system; make sure the

USB/USB2.0 port from the computer functions well.

2. Connect the power adapter to the drive and the USB cable then turn on the

switch.

3. Connect the other USB connector end to the computer.

4. Your USB2.0 drive is now ready to be use.

5. Follow the software installation.

Addonics Technologies – External USB2.0 Enclosure Users Guide v1.0