Contemporary Controls AI-SRVR-1485D 매뉴얼 - 페이지 13

{카테고리_이름} Contemporary Controls AI-SRVR-1485D에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Contemporary Controls AI-SRVR-1485D 20 페이지. Arcnet server to ethernet client

페이지 인쇄

The screen of Figure 6 offers three case-insensitive options:

R forces an immediate refresh of the screen. Otherwise, the screen refreshes itself

automatically every 10 seconds.

S opens the Setup Screen for configuration (Section 4.2.2).

C resets all 4 packet counters.

Q exits the AI-SRVR program. This option is unavailable when connected to the AI-

SRVR via the COM2 port. This port only allows program monitoring — it does not

allow configuration or program control.

4.2.2 AI-SRVR Configuration

By pressing "S" from the AI-SRVR Statistics Screen, the default AI-SRVR Configuration

Screen of Figure 7 appears to allow control of 16 parameters. All fields in the left column

(except Node ID) are modified by pressing the

Function

Boot Protocol

Speed

Ext Timeout

Recon Timeout

Receive All

Node ID is 1 by default, but a value from 1–255 can be entered.

should be toggled to the desired mode: SERVER or PROXY.

is NONE by default, but can be toggled to DHCP.

is 2.5Mbs by default, but can be set from 156kbs to 10Mbs. The

7.5Mbs option is the undocumented "reserved" speed of the

COM20022 — but it is not recommended for use.

is STD by default, but can be set to 16X, 8X or 4X.

is STD by default, but can be set to 64Nodes, 32Nodes or 16Nodes.

(promiscuous mode) is ON by default, but can be toggled to OFF.

Figure 7 — AI-SRVR Configuration Screen

TD000200-0MB

space

bar. These are: