Addonics Technologies Zebra ZESACS 사용자 설명서 - 페이지 4

{카테고리_이름} Addonics Technologies Zebra ZESACS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies Zebra ZESACS 12 페이지. External usb 2.0 enclosure

Chapter 1

Hardware Installation

Enclosure Overview
Firewire
Connections
Screw 1
Fan
Step 1
Loosen the two screws from the rear panel. Pull out the interior tray from the
enclosure.
Step 2
For Model: AE5IDECSU2 (For IDE hard drive installation)
Note: You need to configure your IDE hard drive as MASTER before using it
with the enclosure. If you are not sure how to configure your hard drive as a
MASTER device, contact your hard drive manufacturer.
40-pin IDE
ribbon cable
Addonics Technologies
Screw 2
Switch
Power
Connector
USB Port
Connect the 4-pin Molex power
cable to the power connector of
the hard drive.
Also connect the 40-pin IDE
ribbon cable (MASTER DEVICE
0) to IDE connector of the hard
drive.
4-pin Molex
power cable
4