Addonics Technologies Zebra ZESACS 사용자 설명서 - 페이지 6

{카테고리_이름} Addonics Technologies Zebra ZESACS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies Zebra ZESACS 12 페이지. External usb 2.0 enclosure

페이지 인쇄

Screw holes

Connecting the Drive to a Computer:

1. Boot-up your computer. Make sure the onboard USB2.0 port from the

computer functions well.

2. Connect the power adapter of the enclosure.

3. Connect the USB connector to the enclosure and the other end to the

computer. Turn on the switch.

4. Follow the software installation for driver installation.

Note: Windows 2000 & XP use built-in drivers. No need to install third-party

drivers.

Addonics Technologies

Step 3

Use the enclosed screws to

secure the hard drive to the

tray.

Step 4

After the hard drive is installed,

slide the tray back into the

enclosure and then fasten the

two screws properly.