493K K-METRON 사용자 지침 - 페이지 9

{카테고리_이름} 493K K-METRON에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. 493K K-METRON 18 페이지. Thickness measurement gauge with radio link up and software recording

페이지 인쇄

2 THE K-METRON SOFTWARE

2.1 Connecting the K-METRON to the PC & Installing the

Communications Driver.

Connect the K-METRON receiver unit to the PC using the attached USB flying lead. Allow

Windows to automatically connect to the internet for the latest communication driver. It

will do this automatically upon plugging in the USB flying lead.

2.2 Downloading the K-METRON Software.

Download and install the K-METRON software from the link supplied by 493K. If you do not

have this link it can be found at www.493k.com under the Software heading.

2.3 Setting the Correct Communications Port.

Ensure that the K-METRON software is set to look at the correct communications port that

has been assigned by Windows for the receiver hardward (when the radio receiver was

connected and the driver installed, Windows will have auto-assigned this number).

To determine the communication port number that Windows has assigned go to:

• Windows Control Panel

• Device Manager

• Under Ports (COM & LPT) the USB Serial Port will show the COM number that has

been allocated by Windows e.g.

(in this case Windows has assigned the COM number 18)

8 |

P a g e

K-METRON Radio User Instructions (Firmware 2.3.4; Doc v3.0.0)