Addonics Technologies ZESU3CS 사용자 설명서 - 페이지 3
{카테고리_이름} Addonics Technologies ZESU3CS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies ZESU3CS 3 페이지. Z usb 3.0 / esata drive enclosure
페이지 인쇄
eSATA cable
Installation
1. Loosen the two cover screws on the back of the unit found on
the left and right edges.
2. Install a 2.5", 3.5" or 5.25" SATA device into the tray.
3. Reassemble the unit.
4. Connect the power supply from an AC outlet to the back of the
unit.
5. Connect an eSATA or USB host to the unit and turn it on.
NOTE: When connecting the unit to a host using USB, there must
be no cable connected to the eSATA port on the back of the unit.
CONTACT US
www.addonics.com
Phone:
Fax:
Email:
Power Supply
408-573-8580
408-573-8588
http://www.addonics.com/sales/query/
USB cable