Addonics Technologies ZESU3CS Manual do utilizador - Página 3
Procurar online ou descarregar pdf Manual do utilizador para Invólucro Addonics Technologies ZESU3CS. Addonics Technologies ZESU3CS 3 páginas. Z usb 3.0 / esata drive enclosure
Imprimir página
eSATA cable
Installation
1. Loosen the two cover screws on the back of the unit found on
the left and right edges.
2. Install a 2.5", 3.5" or 5.25" SATA device into the tray.
3. Reassemble the unit.
4. Connect the power supply from an AC outlet to the back of the
unit.
5. Connect an eSATA or USB host to the unit and turn it on.
NOTE: When connecting the unit to a host using USB, there must
be no cable connected to the eSATA port on the back of the unit.
CONTACT US
www.addonics.com
Phone:
Fax:
Email:
Power Supply
408-573-8580
408-573-8588
http://www.addonics.com/sales/query/
USB cable