Aplex TB-587 사용자 설명서 - 페이지 7

{카테고리_이름} Aplex TB-587에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aplex TB-587 10 페이지. Machine vision lighting & i/o control board

페이지 인쇄

Pin#

Pin1(+)

Pin2(-)

Caution：DC_IN1 and DC_IN2 either one. It`s not allowed to use at the same time, or the circuit

will be burnt out.

4. SW1 (TB-587, Internal of the expansion card):

Dip switch ，Pin1 to 4 and Pin6 are reserved for debug use.

Pin5 is set for FPGA function setting choice, choose ON for NPN mode (default); choose OFF for

PNP mode.

This setting is for developer, it is not allowed for user operation under normal condition, if you

need to update the program, please contact your sales or agent window for technical support.

SW1

Pin1

Reserve for debug

Pin2

Reserve for debug

Pin3

Reserve for debug

Pin4

Reserve for debug

Pin5

NPN/PNP Mode choice

Pin6

Reserve for debug-

default hardware mode

5. PWR_SW (TB-587, Internal):

Dip switch, PIN1~PIN4 are uses for lighting source output control interfaces. Set OFF to control

output mode via software; set ON to control output mode (Lighting will always ON) via

hardware. Default mode is OFF, to set via software.

Pin#

External Screen Printing

CH3

CH2

CH1

CH0

Reserve

Function

Software Setting Mode

OFF (Default)

- 7 -

Power Input(DC_IN1)

DC+24-36V

Ground

Default setting

OFF

Hardware Setting Mode

ON (Option)

Option

OFF