Aplex TB-587 사용자 설명서 - 페이지 6

{카테고리_이름} Aplex TB-587에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aplex TB-587 10 페이지. Machine vision lighting & i/o control board

5.3 Jumpers and Connectors Introduction

1. FPGA(Inner):

Onboard FPGA Chipset

(Pitch 5.08mm 1x2 Pin Connector), DC24-36V power input for Lighting using. Before plug in this

Phoenix Connector, please make sure that the power polarity is correct. The more Power

consumption for system, the high power adapter will be needed. Short of power supply will let the

system unstable or work abnormally.

Caution：DC_IN1 and DC_IN2 either one. It`s not allowed to use at the same time, the circuit will

be burnt out.

(Pitch 5.08mm 1x2 Pin Connector), DC24-36V power input for Lighting using. Before plug in this

Phoenix Connector, please make sure that the power polarity is correct. The more Power

consumption for system, the high power adapter will be needed. Short of power supply will let the

system unstable or work abnormally.

Pin#

Pin1(+)

Pin2(-)

- 6 -

Power Input(DC_IN1)

DC+24-36V

Ground