Aplex TB-587 Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Системи вводу/виводу Aplex TB-587. Aplex TB-587 10 сторінок. Machine vision lighting & i/o control board
Друкувати сторінку5.3 Jumpers and Connectors Introduction
1. FPGA(Inner):
Onboard FPGA Chipset
2. DC_IN1 (Internal) option:
(Pitch 5.08mm 1x2 Pin Connector), DC24-36V power input for Lighting using. Before plug in this
Phoenix Connector, please make sure that the power polarity is correct. The more Power
consumption for system, the high power adapter will be needed. Short of power supply will let the
system unstable or work abnormally.
Caution：DC_IN1 and DC_IN2 either one. It`s not allowed to use at the same time, the circuit will
be burnt out.
3. DC_IN2 (External) default:
(Pitch 5.08mm 1x2 Pin Connector), DC24-36V power input for Lighting using. Before plug in this
Phoenix Connector, please make sure that the power polarity is correct. The more Power
consumption for system, the high power adapter will be needed. Short of power supply will let the
system unstable or work abnormally.
Pin#
Pin1(+)
Pin2(-)
- 6 -
Power Input(DC_IN1)
DC+24-36V
Ground