Aplex TB-587 Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Системи вводу/виводу Aplex TB-587. Aplex TB-587 10 сторінок. Machine vision lighting & i/o control board
Друкувати сторінку5 Product Introduction
TB-587 uses FPGA and is designed with the base of effective time and logic judgment, it offers 4 x
lighting connector, 4 x trigger in，4 x trigger out, 8 x DI 8 x DO isolation, NPN/PNP mode Selection. It is
used widely in vision inspection business in industrial automation field, and can extremely enhance the
production effectiveness and product quality.
5.1 Product Specification
Model
System
Bus Interface
I/O Interface
Lighting Control
Trigger
I/O
Power
Power Input
Connector
Dimension
Dimension
Environmental
Operating Temperature
Storage Humidity
Option
TB-587
x1 PCI Express
4x Lighting control (24~36VDC Output)
(Single Route Power Supply up to 30W, 4 Channel Total Power Supply up to
60W)
4x Trigger in
4x Trigger out
16 Bits DIO
(8x DI, 8x DO, Isolation, NPN/PNP Selection, Default NPN)
24~36VDC for lighting
1x 2-pin connector (External on bracket ,or Internal on PCB, can be either
one only) default External power supply
168 mm (L) x 107 mm (W) x 1.6mm (H)
-20°C ~ +70°C
10% - 90%, Non-condensing
TB-587 to DB37 Cable, DB37 Transfer board
- 4 -