APLICOM A9 IPEX 설치 매뉴얼 - 페이지 11

{카테고리_이름} APLICOM A9 IPEX에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. APLICOM A9 IPEX 12 페이지.

Slide cable gland parts toward the gland with the help of the metal nut. Note, that the plastic tightening part

has assembly direction tabs to fit correctly to the metal body. Tabs are shown with the red arrow in the

picture below.

Tighten the nut with the help of the suitable feeler gauge, which thickness depends on used interface cable.

For standard IPEX cable the thickness of the feeler gauge is 2mm. Make sure, that feeler gauge is

removable after tightening the nut. Note! It is not allowed to loose the nut at all after tightening it!

Prior to the tightening of the nut, use the

threadlocker in the thread of the cable gland to

secure the assembly. Suitable threadlocker type

is medium strength type, like Würth 0893243050

or equivalent.