Addonics Technologies Pocket Series 사용자 설명서 - 페이지 5

{카테고리_이름} Addonics Technologies Pocket Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Addonics Technologies Pocket Series 8 페이지. Optical drive

USB2.0 USIB Cable (Model: AAUSBC-309)

Note: Pocket Series Optical Drive is Plug and Play under Windows XP,

2000 and 98/Me. There is no third-party driver needed.

USB2.0

USIB Connector

•

Since USB 2.0 Hi-Speed is an evolution of the existing USB 1.1

specification, it is fully forward and backward compatible with current

USB systems.

•

If you do not have an USB2.0 port, you may install an optional USB2.0

adapter or controller

Downloading the USB2.0 USIB Cable Driver from the Addonics Driver

Disk

1. Insert the Addonics Driver Disk in the CDROM drive. The Addonics

Driver Disk window opens.

2. Select Drivers > Interface Cables Drivers > USB2.0 Cable (AAUSBC-

309) Win98/98SE Only.

3. The Winzip Self-Extractor –AT2LP.exe window opens. Unzip file in My

Documents.

Driver Installation for Win98 and Win98SE

1. Make sure that the power cable and USB2.0 USIB cable are connected

to the Pocket Series Optical Drive.

2. Place the switch in EXT mode. To check if there is power, the LED

should light up.

3. Insert the USB2.0 USIB cable to the USB port. A "New Hardware Found"

message shall pop up.

4. Follow the ON Screen Wizard and point to the location where you unzip

the driver file.

5. Let Windows finish the installation.

Addonics Technologies