Aplisens WW-11ALW 사용자 설명서 - 페이지 16

{카테고리_이름} Aplisens WW-11ALW에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aplisens WW-11ALW 20 페이지.

EN.IO.WW.11.ALW

Figure 10. View of the backlighting jumper of WW-11ALW display in the electronics board (back side of the

electronics board).

9.1. Display configuration

The user can change the display settings using the buttons below the display. The buttons can be

accessed by unscrewing the display cover. The buttons are marked with symbols: [↓], [↑] and [●].

The buttons [↓], [↑] are used to move up and down the MENU structure, and the button [●] confirms

and executes the selected option. Pressing and holding any button for about 4 seconds will cause

enter to the local setting mode, and the following message "EXIT" appears on the display in the field

LCD3. No activity in the MENU area for longer than 2 minutes automatically exits the local setting

mode and goes to display process variable. After confirming the selected parameter, the display will

confirm the acceptance of the command with a "DONE" message. The "← BACK" button allows to

move up a level higher in the MENU structure.

The way of navigating in the MENU structure of the local display is shown in the diagram below.

Revision 01.B.003/2020.09