Aplisens WW-11ALW 사용자 설명서 - 페이지 5
{카테고리_이름} Aplisens WW-11ALW에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aplisens WW-11ALW 20 페이지.
페이지 인쇄
1.
INTRODUCTION
The subject of manual is display type WW-11ALW. The manual applies to the standar and intrinsically
safe Exi versions.
The manual contains data, tips and general recommendations for safe installation and operation of
the display, as well as troubleshooting in case of possible failure.
2.
SAFETY
−
The installation and start-up of the device and any activities related to the operation shall
be carried out after thoroughl examination of the contents of user's manual;
−
installation and maintenance should be carried out by qualified staff having the required
authorizations to install electrical equipment and measuring devices;
−
the device shall be used according to its intended purpose in line with the permissible
parameters specified on the nameplate
−
the protection elements used by the manufacturer to ensure display safety may be less
effective if the device is operated in a manner not consistent with its intended purpose;
−
before installing or disassembling the device, it is absolutely necessary to disconnect it
from the power source;
−
no repairs or alterations to the display electronic system are permitted. Assessment of
damages and possible repair may only be performed by the manufacturer or authorized
representative;
−
do not use instruments if damaged. In case of malfunction, the device must be put out of
operation;
−
when using the device in potentially explosive areas, the technical requirements speci-
fied in the manual and the applicable local (national) regulations must be observed.
Revision 01.B.003/2020.09
(➔ Display
identification);
EN.IO.WW.11.ALW
5