Aplisens WW-11ALW Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Aplisens WW-11ALW. Aplisens WW-11ALW 20 pagina's.

INTRODUCTION

The subject of manual is display type WW-11ALW. The manual applies to the standar and intrinsically

safe Exi versions.

The manual contains data, tips and general recommendations for safe installation and operation of

the display, as well as troubleshooting in case of possible failure.

−

The installation and start-up of the device and any activities related to the operation shall

be carried out after thoroughl examination of the contents of user's manual;

−

installation and maintenance should be carried out by qualified staff having the required

authorizations to install electrical equipment and measuring devices;

−

the device shall be used according to its intended purpose in line with the permissible

parameters specified on the nameplate

−

the protection elements used by the manufacturer to ensure display safety may be less

effective if the device is operated in a manner not consistent with its intended purpose;

−

before installing or disassembling the device, it is absolutely necessary to disconnect it

from the power source;

−

no repairs or alterations to the display electronic system are permitted. Assessment of

damages and possible repair may only be performed by the manufacturer or authorized

representative;

−

do not use instruments if damaged. In case of malfunction, the device must be put out of

operation;

−

when using the device in potentially explosive areas, the technical requirements speci-

fied in the manual and the applicable local (national) regulations must be observed.

Revision 01.B.003/2020.09

(➔ Display

identification);

EN.IO.WW.11.ALW