Apodemus BatLure 매뉴얼 - 페이지 5

{카테고리_이름} Apodemus BatLure에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Apodemus BatLure 8 페이지.

페이지 인쇄

On Windows: Open "My Computer", right-click on your SD card. Select "Format" from

the menu, then choose "FAT" and press start.

Editing the BatLure configuration file (a computer is needed)

1. Place the SD card in your computer and navigate to its location.

2. Open the file "batlureconfig.txt" in the top directory of the SD card, use a plain text editor like

notepad.

To get a fresh copy of "batlureconfig.txt":

a. Delete or rename the file "batlureconfig.txt" from you SD card (if there is one);

b. Place the SD card in the BatLure and turn it on;

c. After 5 seconds you can turn it off;

d. A fresh copy of "batlureconfig.txt" is placed on the SD card.

3. You can modify the file by changing the numerical values. If you use unrecognized values, a

factory set of values will be used instead.

4. When you have set the "batlureconfig.txt" according to your wanted setting, save it to the SD

card and safely remove the SD card. It is now ready to use.

Field:

Values:

time_expansion

0 or 1

track_pause

1 to 600

startup_volume

0 to 31

repeat

1 to 100

repeat_time

0 to 600

list_pause

sine_mod_time

sine_mod_volmin

Units:

off/on

Enables or disables the time expansion feature.

With this feature enabled, all files with a sample

rate below 20KHz will be played 10x faster.

seconds

Determines the pause between two files.

steps

Determines the volume level at power on.

times

Number of times to repeat a wave file (only

when the file is shorter than repeat_time)

seconds

Threshold time to decide when to repeat a wave

file.

Pause at the end of playlist, before repeating

Sine modulation period (seconds), set to 0 to

disable this feature

Sine modulation lower volume level

Explanation:

Version: 2014-11-18