Apogee 11056017 사용 설명서 - 페이지 10

{카테고리_이름} Apogee 11056017에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Apogee 11056017 13 페이지. Blot transfer systems



Use the original box or a similarly sturdy one.



Please enclose a detailed description of the fault and when, or how, the problem occurred.

Important: Clean all parts from residues and of biologically dangerous, chemical and radioactive

contaminants. Please include a written confirmation (use the respective Decontamination

Declaration/Certificate following in Section 8 that the device is free of biologically dangerous and

radioactive contaminants in each shipment. If the device is contaminated, it is possible that Apogee will

be forced to refuse to accept the device. The sender of the repair order will be held liable for possible

damages resulting from insufficient decontamination of the device.

Please enclose a note which contains the following:

1. Sender's name and address and,

2. Name of a contact person for further inquiries with telephone number.

5.4.1 CLEANING AND DECONTAMINATION FOR RETURN OF PRODUCTS

Use the original product packaging whenever possible, to avoid damage to the unit being returned. All

returned material must be cleaned and decontaminated prior to shipping. The components of

apparatus products are fabricated from a variety of materials including: ABS, acrylic, vinyl, glass, silicone,

aluminum and stainless steel. Please clean any unit or product to be returned using the following three

step procedure.

STEP 1: GENERAL CLEANING PROCEDURE

For materials not contaminated with biological or radiological substances, components may be gently

washed with water and a non-abrasive detergent, and rinsed with deionized water. Dry using a soft

cloth, paper towel or allow to air dry. A light application of hexane, kerosene, or aliphatic naphtha will

remove grease.

To prevent surface damage, never use abrasive cleaners, window sprays or scouring pads to clean these

products. Avoid excessive exposure to UV light, phenol, acetone, benzene, halogenated hydrocarbon

solvents or undiluted alcohols because they may cause crazing.

STEP 2: BIOLOGICAL CLEANING PROCEDURE

Using a solution of either 5% household bleach in water or 70% ethanol in water, wipe down the

apparatus using a clean cloth or sponge. Neutralize the solution by wiping the surface with a mild,

nonabrasive detergent and rinse well with water.

STEP 3: RADIOLOGICAL DECONTAMINATION PROCEDURE

To meet various regulatory and safety standards, please follow the decontamination procedure given

here if radioactive materials are used with this product or are used in the vicinity of where this

apparatus has been used or stored.

WARNING:

We cannot and will not accept return of products that are contaminated with any

radioactivity.

Apogee Electrophoresis | 101 Kane Street | Baltimore, MD 21224 USA | apogeephoresis.com