Apogee 11056017 Інструкція з експлуатації - Сторінка 10

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Вимірювальні прилади Apogee 11056017. Apogee 11056017 13 сторінок. Blot transfer systems

Use the original box or a similarly sturdy one.
Please enclose a detailed description of the fault and when, or how, the problem occurred.
Important: Clean all parts from residues and of biologically dangerous, chemical and radioactive
contaminants. Please include a written confirmation (use the respective Decontamination
Declaration/Certificate following in Section 8 that the device is free of biologically dangerous and
radioactive contaminants in each shipment. If the device is contaminated, it is possible that Apogee will
be forced to refuse to accept the device. The sender of the repair order will be held liable for possible
damages resulting from insufficient decontamination of the device.
Please enclose a note which contains the following:
1. Sender's name and address and,
2. Name of a contact person for further inquiries with telephone number.
5.4.1 CLEANING AND DECONTAMINATION FOR RETURN OF PRODUCTS
Use the original product packaging whenever possible, to avoid damage to the unit being returned. All
returned material must be cleaned and decontaminated prior to shipping. The components of
apparatus products are fabricated from a variety of materials including: ABS, acrylic, vinyl, glass, silicone,
aluminum and stainless steel. Please clean any unit or product to be returned using the following three
step procedure.
STEP 1: GENERAL CLEANING PROCEDURE
For materials not contaminated with biological or radiological substances, components may be gently
washed with water and a non-abrasive detergent, and rinsed with deionized water. Dry using a soft
cloth, paper towel or allow to air dry. A light application of hexane, kerosene, or aliphatic naphtha will
remove grease.
To prevent surface damage, never use abrasive cleaners, window sprays or scouring pads to clean these
products. Avoid excessive exposure to UV light, phenol, acetone, benzene, halogenated hydrocarbon
solvents or undiluted alcohols because they may cause crazing.
STEP 2: BIOLOGICAL CLEANING PROCEDURE
Using a solution of either 5% household bleach in water or 70% ethanol in water, wipe down the
apparatus using a clean cloth or sponge. Neutralize the solution by wiping the surface with a mild,
nonabrasive detergent and rinse well with water.
STEP 3: RADIOLOGICAL DECONTAMINATION PROCEDURE
To meet various regulatory and safety standards, please follow the decontamination procedure given
here if radioactive materials are used with this product or are used in the vicinity of where this
apparatus has been used or stored.
WARNING:
We cannot and will not accept return of products that are contaminated with any
radioactivity.
Apogee Electrophoresis | 101 Kane Street | Baltimore, MD 21224 USA | apogeephoresis.com