Apogee DLX24 사용자 사용 설명서 - 페이지 6

{카테고리_이름} Apogee DLX24에 대한 사용자 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Apogee DLX24 20 페이지. Digital loudspeaker controller/system control manager software

2. Installation

The Apogee DLX24 can be mounted in a standard 19" rack (482.6 mm) taking up one rack unit height

(44 mm). For professional use it is recommended to place the processor in the same rack as the power

amplifiers. Given the small power consumption of the unit, no ventilation is required. Nevertheless, it is advisable

not to expose the unit to extreme temperatures, and to ensure a dry and dust-free operating environment.

It is important not to place the processor next to electrical noise sources such as transformers, voltage

dimmers, motors, etc., or their mains supply cables. The metal cover of the device should never be removed

under any circumstance.

The unit operates with AC MAINS between 100–240V at 50 to 60 Hz. The device features a power supply

which adapts itself to any mains voltage around the world, without needing any manual adjustment.

Even though the noise produced by powering up is minimal, it is always advisable to follow this power up

sequence: signal sources, mixing unit, processor, and lastly, power amplifiers. The power-down sequence

must follow a reverse order exactly. By closely following these sequences, all peaks or transients produced

by switching devices on and off do not affect the next devices in the chain and never reach the loudspeakers,

which are extremely sensitive to this.

Cleaning the Unit

Do not clean the DLX24 control panel with any solvent, abrasive, or petroleum-based substance; doing

so can damage the unit's finish and silk-screen printing. When cleaning is necessary, use a damp soft

cloth with plain liquid soap. Be careful not to get any liquid in any of the unit's openings. Never use sharp

or erosive objects on the unit's control panel.