Apogee DLX24 사용자 사용 설명서 - 페이지 8

{카테고리_이름} Apogee DLX24에 대한 사용자 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Apogee DLX24 20 페이지. Digital loudspeaker controller/system control manager software

SYSTEM CONTROL MANAGER

The Apogee DLX24 device can only be config-

ured through the System Control Manager

application since the DLX24 has no local controls.

NOTE: The System Control Manager Software

application is available via free download direct

from the www.apogeesound.com website.

5.1 Installation and Connection of the DLX24

Once you have downloaded the software, it is recommended that you first connect the USB cable supplied

with the equipment between a computer's USB port and the DLX24's USB port. After this, the installation is

performed by running the downloaded installer file and following the steps displayed on screen.

Once installed, run the System Control Manager

application to connect with the hardware.

This is done by selecting Device -> Select from

the top bar menu. When prompted for Device

Type, select DLX24/DLX24i from the drop-

down option menu. (see Fig. 5-1, Select Device

Screen)

Then click the Connect with Device button

(see Fig. 5-2) to establish communication with

the hardware device and choose the synchro-

nization option (click Send to send the current

configuration to the hardware device or click

Get to load the hardware device's current

setting in the application). (see Fig. 5-3, Device

Connect Screen)

Click on the text field to rename your hardware

device. (see Fig. 5-4, Device Name Text Field)

Fig. 5-1

Fig. 5-2

Fig. 5-3

Fig. 5-4