Apogee DLX24 Інструкція з експлуатації - Сторінка 8
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Обладнання для запису Apogee DLX24. Apogee DLX24 20 сторінок. Digital loudspeaker controller/system control manager software
Друкувати сторінку5. Software Configuration
SYSTEM CONTROL MANAGER
The Apogee DLX24 device can only be config-
ured through the System Control Manager
application since the DLX24 has no local controls.
NOTE: The System Control Manager Software
application is available via free download direct
from the www.apogeesound.com website.
5.1 Installation and Connection of the DLX24
Once you have downloaded the software, it is recommended that you first connect the USB cable supplied
with the equipment between a computer's USB port and the DLX24's USB port. After this, the installation is
performed by running the downloaded installer file and following the steps displayed on screen.
Once installed, run the System Control Manager
application to connect with the hardware.
This is done by selecting Device -> Select from
the top bar menu. When prompted for Device
Type, select DLX24/DLX24i from the drop-
down option menu. (see Fig. 5-1, Select Device
Screen)
Then click the Connect with Device button
(see Fig. 5-2) to establish communication with
the hardware device and choose the synchro-
nization option (click Send to send the current
configuration to the hardware device or click
Get to load the hardware device's current
setting in the application). (see Fig. 5-3, Device
Connect Screen)
Click on the text field to rename your hardware
device. (see Fig. 5-4, Device Name Text Field)
4
Fig. 5-1
Fig. 5-2
Fig. 5-3
Fig. 5-4