Apogee Mini-MP 사용자 설명서 - 페이지 11

{카테고리_이름} Apogee Mini-MP에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Apogee Mini-MP 16 페이지. 2-channel analog mic/instrument pre-amp
Apogee Mini-MP에 대해서도 마찬가지입니다: 데이터시트 (2 페이지)

페이지 인쇄

Mini-MP – User's Guide

Navigating the Rear Panel

DC POWER - The Mini-MP operates from a high quality external switching power supply, included with the unit.

The power supply's cable may be secured to the unit with the adjacent strain relief tab and thumbscrew.

Alternatively, any regulated 6-14 volt DC power supply capable of providing 1.25 amps of current will properly

power the Mini-MP

L-R OUT – These XLR balanced Line outputs are able to supply a maximum output level of +26 dBu into

a balanced load, and +20 dBu into an unbalanced load. No special precautions are needed when driving

unbalanced loads. Units are shipped so that the polarity is pin 2 "Hot", but may be set to pin 3 "Hot" with an

internal jumper.

L-R IN. – These XLR Mic connections are low-impedance balanced inputs capable of accepting levels up to

+18dBu, while the 1/4" Instrument connections are ultra-high impedance unbalanced inputs capable of accepting

levels up to +23 dBu

APOGEE ELECTRONICS