Apollo Sprayers T6000 사용 설명서 - 페이지 8

{카테고리_이름} Apollo Sprayers T6000에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Apollo Sprayers T6000 11 페이지. Mist applicator

1. You are now ready to begin misting.

2. The ON/OFF Switch is located under the carry handle of the T100 Turbo Unit. Turn it on. You will hear

a sound similar to a vacuum cleaner. You may also notice that air is now blowing out of the front of the

Mist applicator. This is correct. Air will continually flow from the air cap of the Mist applicator as long as

The T100 Turbo Unit is running and the air hose is connected.

3. Open the Solution Flow Screw as described in item 4.

4. Set the mist pattern you wish to use by adjusting the air cap to the desired position. Refer to Mist

Pattern Diagram.

5. Direct the Mist applicator to the area of the body that you want to start spraying.

6. Pull back on the trigger (#13) and move the Mist applicator as noted in the diagram below. Do not wave

a. the Mist applicator back and forth in front of your client by bending your wrist. Rather, keep your

wrist straight and move your entire arm. Movement should be steady, even and deliberate,

keeping your distance the same at all times.

6 Mist Applicator Maintenance

PROPER MISTING TECHNIQUE