App-Tronics SmartVision 운영 매뉴얼 - 페이지 12
{카테고리_이름} App-Tronics SmartVision에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. App-Tronics SmartVision 12 페이지.
페이지 인쇄1. Guide the rear camera harness from the end of the main harness to the back of the vehicle removing
trim pieces as needed. Note: Route the correct end to the back of the vehicle. You only need to tie the
Red
power line for rear camera to the other
powered from the blue accessory line on main harness.
3. You may need to also attach the black ground wire for the rear camera yet may not be needed. Please
refer to picture below or call 1-888-587-4111 for assistance
4. Find a suitable location to attach the rear camera to the vehicle. Depending on vehicle, cameras may
vary. Use the provided double sided tape and screws provided for installation. (Some trim pieces will
need to be removed and then reinstalled for proper installation).
The SmartVision must be installed as shown to run properly. Please seek professional assistance if
Red
pigtail on the rear camera harness. The camera will be
needed.