App-Tronics SmartVision Operationele handleiding - Pagina 12

Blader online of download pdf Operationele handleiding voor {categorie_naam} App-Tronics SmartVision. App-Tronics SmartVision 12 pagina's.

1. Guide the rear camera harness from the end of the main harness to the back of the vehicle removing

trim pieces as needed. Note: Route the correct end to the back of the vehicle. You only need to tie the

Red

power line for rear camera to the other

powered from the blue accessory line on main harness.

3. You may need to also attach the black ground wire for the rear camera yet may not be needed. Please

refer to picture below or call 1-888-587-4111 for assistance

4. Find a suitable location to attach the rear camera to the vehicle. Depending on vehicle, cameras may

vary. Use the provided double sided tape and screws provided for installation. (Some trim pieces will

need to be removed and then reinstalled for proper installation).

The SmartVision must be installed as shown to run properly. Please seek professional assistance if

Red

pigtail on the rear camera harness. The camera will be

needed.