4EVAC IMPACT 사용자 설명서 - 페이지 3

{카테고리_이름} 4EVAC IMPACT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 4EVAC IMPACT 14 페이지. Controller
4EVAC IMPACT에 대해서도 마찬가지입니다: 참조 매뉴얼 (8 페이지)

Hacousto Holland bv

Industrieweg 87

2651BC Berkel & Rodenrijs

CONTROLLER user manual

Thank you for choosing 4EVAC as your Voice Evacuation System solution.

4EVAC Impact is a 19" rack format, EN54-16 certified Voice Evacuation System, dedicated to medium to

large installations. The Impact system is capable of both standalone and network operation, for a wide

selection of peripheral devices and remote extensions. 4EVAC Impact is certified in accordance with EN54-

16 and EN54-4, which are harmonized standards under the Construction Products Regulation, mandatory

in the European Union.

The 4EVAC Impact system is fully compatible with the Compact 500 Voice Evacuation System. This means

that both systems can be connected to one network, running the same protocol in peer-to-peer

architecture, operating within the same space of voice evacuation zones, sharing the same audio messages,

BGM broadcasts, microphone consoles, I/O extensions and cabling infrastructure.

1. General information

4EVAC Controller is the head unit of the 19" rack mounted Impact Voice Evacuation System. The Controller

covers complete EN54-16 certified functionality, as well as a variety of features essential to Public Address

applications.

4EVAC Controller incorporates 16 monitored contact inputs; 8 GPO, 4 relay outputs, 2 analogue audio

inputs and 2 outputs. In addition, local network interfaces for max. 16 local peripheral devices (e.g. mic

consoles) and 2 global network ports for interconnecting multiple systems in a redundant ring topology

are included.

The Controller is designed to work with 4EVAC DCA2.500 power amplifiers over a 4EVAC proprietary AMP

LINK protocol. The Controller can also be easily integrated with any third-party PA/VA power amplifier.

Indicates if the Controller is being powered and if the system is properly booted.

OFF

GREEN continuous

GREEN blinking

Author:

Not powered

This device is powered and operational.

This device is booting after power up / reset.

Page 3 of 14